/
Read min cycle time with iqTool

Read min cycle time with iqTool

  1. Connect iqInterface to IO-Link Device (should be already connected)

  2. Establish IO-Link Communication

  3. Read MinCycleTime: Index = 0x0000, Subindex = 0x03

  4. In log the Min cycle time value is seen:

 

Related content

IO-Link device as DUT
IO-Link device as DUT
More like this
Master Configuration
Master Configuration
More like this
IO-Link device communication parameters
IO-Link device communication parameters
More like this
IO-Link master mode
IO-Link master mode
More like this
Change IO-Link operation mode
Change IO-Link operation mode
More like this
IO-Link generic device mode
IO-Link generic device mode
More like this