/
Cannot connect to IQ2 Development software

Cannot connect to IQ2 Development software

  1. Connect to XPORT with Device Installer

  2. Set to default settings:

    • Go to web configuration

    • Press “Apply default”

    • Press “Apply settings”

3. Reload Device setting

4. Setup CPU “High” performance

  • Go to web configuration

  • Open “Server” tab

  • Select “High” in CPU performance mode

  • Press “Done”

5. Setup Serial Port speed:

  • Open “Serial connection”

  • Select “921600” baudrate

  • Press “Done”

Press “Apply settings”

Related content

Cannot connect iqInterface with direct connection
Cannot connect iqInterface with direct connection
More like this
USB Communication Problems
USB Communication Problems
More like this
Installation guide
Installation guide
More like this
PC connection configuration
PC connection configuration
More like this
Troubleshooting
More like this
Hardware setup
More like this