Paragraph content

Version 1.1.0.1 (04.03.2013)

• first hardware and bootloader launch
• first master stack integration and IO-Link communication

Version 1.1.0.2 (04.07.2013)

• add IQ Generic Device
• non-volatile memory configuration save

Version 1.1.0.3 (12.10.2013)

• add first version of bootloader with update and supported modes upgrade functions via RS232 and USB
• change iq communication frame (swap checksum and length byte, set confirm bit 7 in command byte)

Version 1.1.0.4 (25.11.2013)

• direct mode for RS232

Version 1.1.0.5 (03.12.2013)

• add USB support for direct mode

Version 1.1.0.6 (25.08.2014)

• add system command reset for generic device (index 2 subindex 0)
• prohibit adding indeces 0, 1, 2, 3, 0x0C to generic device ISDU structure
• allow switching from operate to auto and check fault to preoperate, because the state is already achieved
• add io-link power supply on/off iq parameter/command
• make Master ISDU read/write requests and generic device send event commands repeatable (idempotent)

Version 1.1.0.7 (15.04.2015)

• minor bug fixes

Version 1.1.0.8 (12.05.2015)

• Bug with EMC error counter reading collision fixed. Bug appeared on COM3 Baudrate when PC EMC_Utility was polling the error counter and therefore broke the IO-Link communication;

Version 1.1.0.9 (06.07.2015)

• Generic device: ISDU request notification ISDU response from PC with custom data