Skip to end of metadata
Go to start of metadata
Paragraph content
Version 1.1.0.1 (04.03.2013)
- first hardware and bootloader launch
- first master stack integration and IO-Link communication
Version 1.1.0.2 (04.07.2013)
- add IQ Generic Device
- non-volatile memory configuration save
Version 1.1.0.3 (12.10.2013)
- add first version of bootloader with update and supported modes upgrade functions via RS232 and USB
- change iq communication frame (swap checksum and length byte, set confirm bit 7 in command byte)
Version 1.1.0.4 (25.11.2013)
Version 1.1.0.5 (03.12.2013)
- add USB support for direct mode
Version 1.1.0.6 (25.08.2014)
- add system command reset for generic device (index 2 subindex 0)
- prohibit adding indeces 0, 1, 2, 3, 0x0C to generic device ISDU structure
- allow switching from operate to auto and check fault to preoperate, because the state is already achieved
- add io-link power supply on/off iq parameter/command
- make Master ISDU read/write requests and generic device send event commands repeatable (idempotent)
Version 1.1.0.7 (15.04.2015)
Version 1.1.0.8 (12.05.2015)
- Bug with EMC error counter reading collision fixed. Bug appeared on COM3 Baudrate when PC EMC_Utility was polling the error counter and therefore broke the IO-Link communication;
Version 1.1.0.9 (06.07.2015)
- Generic device: ISDU request notification ISDU response from PC with custom data