In master mode iqInterface can be connected to other IO-Link device to perform standard IO-Link master actions. You can configure master system manager parameters (cycle time, device check level etc.) and setup data storage. After configuring the master you can change IO-Link operation mode (inactive, preoperate, operate, auto), receive IO-Link events, set/get process data and read/write ISDU parameters. You can also record macro actions sequences to replay them automatically at once. To switch into master mode:
- disconnect iqTool from iqInterface if connected (see PC connection)
- select “iqMaster” tab and connect iqTool to iqInterface again
