FTDI chip configuration

FTDI chip is used in iqInterface and iqLink Products as USB PHY transceiver.

During the production phase, FTDI chip should be configured with correct parameters to provide maximum performance.

"FT_Prog" Software tool used to accomplish this task. Use the following guide:

1.  Download and install latest "FT_Prog" software tool from provided link:
   

   http://www.ftdichip.com/Support/Utilities.htm#FT_PROG

   (direkt link http://www.ftdichip.com/Support/Utilities/FT_Prog_v3.1.72.360%20Installer.exe)

2. Connect iqGadget with and start "FT_Prog" tool.
3. In the main window of "FT_Prog" tool click "Scan" Button.
   
   
   
   
4. Go to "Device ->USB Config Descriptor" node in the Device-Tree Navigator and set "Max Bus Power" parameter to 500mA.
   
   
   
   
5. Go to "Device->Hardware Cpecific->CBUS Signals" node in the Device-Tree Navigator and set "C3: property to the "PWREN" value.
   
   
   
   
6. Click “Program Device” button in main ToolBar.
7. In opened window "Programm Devices" click "Programm" button one more time:
   
   
   
   
8.  Configuraion complete.