...
USB connection is actually a virtual comport connection. To use it you should install a USB driver for Windows OS, which can be found on the USB flash drive delivered with iqInterface under “usb_driver\Windows XP_7_8”. You can also visit the driver homepage for updates.
Ethernet (LAN) communication works over UDP and TCP/IP protocols using 30718 and 10001 ports by default. It is tested and suitable only for networks with automatic DHCP configuration. If you have some specific settings in your local network where you are going to use iqInterface, contact your system administrator in case of iqInterface detection problems.
| Info | ||
|---|---|---|
| ||
The startup time of ethernet connection can be up to several minutes. Please, wait at least 2 minutes after plugging the ethernet cable in the powered iqInterface or after power reset if there is you have a problem with connection to the iqInterface. You can monitor the state of corresponding network connection in "Control Panel\Network and Internet\Network Connections" (Windows 7). |
...