FTDI chip is used in iqInterface and iqLink Products Product as USB PHY transceiver.
During the production phase, FTDI chip should be configured with correct parameters to provide correct functionality and maximum performance.
The following FTDI chip options should be configured:
- The maximal current drawn through the USB port when the device is connected;
- Pull-down IO pins In USB suspend mode;
CBUS3 pin should be configured as PWREN# in the internal MTP memory, and
used to switch the power supply to the external circuitry.
The following values should be assigned:
- Max current = 500mA;
- Pull-Down = true;
- CBUS C3 pin = POWEREN#
"FT_Prog" Software tool used to accomplish this task. Use the following guide for configuration:
- Download and install latest "FT_Prog" software tool from provided linkthe link provided:
http://www.ftdichip.com/Support/Utilities.htm#FT_PROG
(direkt link direct link http://www.ftdichip.com/Support/Utilities/FT_Prog_v3.1.72.360%20Installer.exe)
- Connect iqGadget iqLink gadget with and start USB cable and make sure it's recognized by OS as Virtual COM Port connection.
- Start "FT_Prog" toolsoftware.
- In After the main window of "FT_Prog" tool appeared click "Scan" Button.:
- Go to "Device ->USB Config Descriptor" node in the Device-Tree Navigator and set "Max Bus Power" parameter to 500mA.
.
- On the same view (Device ->USB Config Descriptor) set "Bus-powered" Option to true (as long as iqLink powered by Bus):
- On the same view (Device ->USB Config Descriptor) set the "Pull Down IO Pins in USB Suspend" checkbox to true.
- Go to "Device->Hardware CpecificSpecific->CBUS Signals" node in the Device-Tree Navigator and set "C3: property to the "PWREN" value.
- Click “Program Device” Devices” button in the main ToolBar or choose menu "Devices" → "Program".
- In opened window "Programm Program Devices" make sure connected device checked in Device List and click "Programm" button one more timeto program the memory:
- Configuraion Configuration complete.
...