Page Comparison

...

1.  Download and install latest "FT_Prog" software from the link provided:
   

   http://www.ftdichip.com/Support/Utilities.htm#FT_PROG

   (direct link http://www.ftdichip.com/Support/Utilities/FT_Prog_v3.1.72.360%20Installer.exe)

   
   

2. Connect iqLink gadget with USB cable and make sure it's recognized by OS as Virtual COM Port connection.
   
   
   
   
3.  Start "FT_Prog" software.
4. After the main window appeared click "Scan" Button:
   
   
   
   
5. Go to "Device ->USB Config Descriptor" node in the Device-Tree Navigator and set "Max Bus Power" parameter to 500mA.
   
   
   
   
6. On the same view  (Device ->USB Config Descriptor) set "Bus-powered" Option to true (as long as iqLink powered by Bus):
   
   Image Added
   
   
7. On the same view (Device ->USB Config Descriptor) set the "Pull Down IO Pins in USB Suspend" checkbox to true.
   
   
   
   
8. Go to "Device->Hardware Specific->CBUS Signals" node in the Device-Tree Navigator and set "C3: property to the "PWREN" value.
   
   
   
   
9. Click “Program Devices” button in the main ToolBar or choose menu "Devices" → "Program".
   
   
   
   
10. In opened window "Program Devices" make sure connected device checked in Device List and click "Programm" button to program the memory:
    
    
    
    
11.  Configuration complete.

...