IO-Link master mode

Owned by Former user (Deleted)
Last updated: Oct 07, 2015
1 min read

In master mode iqInterface can be connected to other IO-Link device to perform standard IO-Link master actions. You can configure master system manager parameters (cycle time, device check level etc.) and setup data storage. After configuring the master you can change IO-Link operation mode (inactive, preoperate, operate, auto), receive IO-Link events, set/get process data and read/write ISDU parameters. You can also record macro actions sequences to replay them automatically at once. To switch into master mode:

  • disconnect iqTool from iqInterface if connected (see PC connection)
  • select “iqMaster” tab and connect iqTool to iqInterface again